-40%

Blinker Genie 2 - for AUTOMOBILES. Converts 2-wire LED to 3-wire = Run and Turn!

$ 15.83

Availability: 267 in stock
  • Part Type: Blinker Module
  • Part Brand: Custom LED
  • Returns Accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Country of Manufacture: United States
  • Manufacturer Part Number: BGA_REV0
  • Condition: New
  • Restocking Fee: 20%
  • Return shipping will be paid by: Seller
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Country/Region of Manufacture: United States
  • Brand: Custom LED
  • Warranty: Yes

    Description

    Custom LED Blinker Genie 2 - for AUTOMOBILES (pair)
    Converts 2-Wire LEDs to 3-Wire for Run and Turn function!
    Manufacturer Direct purchase with Warranty and Satisfaction Guarantee!
    Made in the USA!
    Allows for Run AND Turn operation of Single-Intensity blinker lamps on automobiles.
    Works with LED or incandescent blinker lamps.
    Specifically designed for Automobiles that have switchable running light circuits.
    High-Power capacity of 2A/ 25 Watts.
    Comes as a complete kit with electrical connectors and detailed instructions.
    High-speed solid state design is compatible with all flasher relay patterns.
    Low on-state resistance means your indicators will be as bright as possible.
    Designed for AUTOMOBILES (
    see Motorcycle special note below
    ).
    Manufacturer direct purchase!
    1-year
    Warranty
    &
    Satisfaction Guarantee
    !
    In Stock!
    QTY of 2 "Blinker Genie 2" included, sold in PAIRS, one left one right.
    OVERVIEW
    The
    Blinker Genie for Motorcycles
    has been a huge success, but was not ideal for use on automobiles.  We have now designed this Blinker Genie specifically for Automobiles called the Blinker Genie 2.
    The Blinker Genie 2 - for Automobiles - is designed to allow single filament light bulbs, and single intensity LED lamps, to function as both running lights AND blinkers - at full brightness!
    Properly connect any two-wire incandescent or LED lamp(s) to the Custom LED Blinker Genie 2, and your lamps will now function as both running lights and turn signals!
    Each Blinker Genie 2 controls up to 2A (25 Watts) worth of indicator lamps in the recommended configuration.  This ensures our product will work for a wide variety of situations and indicator lamp types.
    The Custom LED Blinker Genie 2 is designed to be as small as possible while being as versatile and robust as possible.  The finished dimensions of the unit will measure less than 0.7" x 2.5" X 0.25", and it is water resistant for reliable operation.
    OPERATION
    Running Lights OFF:
    The Blinker Genie 2 will pass voltage from the turn signal input to blink the connected lamps on.  The lamps will remain off if the blinker is not engaged.
    Running Lights ON:
    The Blinker Genie 2 will pass voltage from the running light input to power the lamps as running lights, and will blink the lamps off anytime there is voltage on the turn signal input.
    This way, in any input scenario, the functions of run and turn are achieved.
    The Blinker Genie 2 has 7" wire leads, all required electrical connectors and detailed installation instructions.
    Please read the important notes in the Installation Tab for other accessories that may be required to maintain proper function of the blinker system after installing the Blinker Genie.
    ELECTRICAL SPECIFICATIONS
    Maximum Recommended Indicator Load: 2A (25W)
    Internal Resistance: 0.18 OHMS
    Maximum Switching Speed:  1Mhz
    Switch type: Advanced Power MOSFET
    ONLY functions with a Negative Ground System (most common)
    INSTALLATION
    You will most likely experience the fast-blink rate if you use the Blinker Genie 2 on your automobile to control an OEM blinker lamp. It is important to note that the Blinker Genie 2 effectively removes the operated lamp(s) from the turn signal circuit when the running light circuit is on.  This is detected as a bulb burned out by most vehicles flasher relay, and a fast-blink rate results.
    Please consider replacing your flasher relay with a suitable
    Electronic LED Flasher Relay
    (preferred) or use an appropriate
    Load Equalizer
    instead (second method) to control blink speed issues.
    Typical Installation Diagram
    Installation Instructions
    Installation instructions for the Custom LED Blinker Genie 2 is directly below
    click icon to download
    Adobe Acrobat Reader is required to view this file.
    If you are having problems viewing the file, please download the free software
    here
    .
    For technical questions, please contact us VIA Ebay Messaging.
    MOTORCYCLE INSTALLATION
    For motorcycles, the
    Blinker Genie for Motorcycles
    is recommended
    .
    SHIPPING
    NON USA BUYERS SHIPPING NOTE:
    Please note,
    USPS First Class Mail International can take up to 45 days to arrive to some destinations
    ! If you need this product quicker than that, please consider the other two faster shipping options (Priority and Express). Thank You!